High Speed Blender Instruction Manual Model: NY-8608 AC120V, 50/60Hz, 1450W
[ IMPORTANT ] Please feel free to check out our website www.homgeek.com for more information. Most customer has useful discover there, you probably will, too.
IMPORTANT SAFEGUARDS WARNING: This unit contains electrical connections and moving parts that potentially present risk to the user. To avoid the risk of serious injury when using your blender. basic safety precautions should be followed, including but not limited to following: READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER.
16. Avoid touching moving parts. 17. Alteration or modification of any part of the blender base or container, including the use of any part or parts that are not genuine authorized homgeek parts, may cause fire, electric shock, or injury. 18. The use of attachments, including canning jars, not expressly authorized or sold by homgeek for use with this blender, including container, may cause fire, electric shock, or injury. 19. Do not use outdoors. 20. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
44. DO NOT attempt to sharpen blades. 45. DO NOT expose container to extreme temperature changes. 46. Appliance accessories are not intended to be used in the microwave. Do not place the container or the lid in the microwave as it may result in damage to the accessories. 47. Extension cords are not recommended for use with this product. 48. If the appliance overheats, a thermal switch will activate and temporarily disable the motor.
Specifications Product Model Voltage NY-8608 120V Frequency 60Hz Power Capacity Max. Speed 1450W 2.0L 33000RPM PARTS & FEATURES Lid Plug 2-Part Lid Tamper 2.
2-Part Lid:The 2-part Lid is easy to put on and take off and easy to clean. Always use the complete 2-part lid when blending, especially when blending hot ingredients (unless the tamper is inserted through the lid plug opening). Never operate the blender without the lid securely latched during operation. Lid Plug: Insert through the lid plug opening and secure by turning clockwise. Turn counterclockwise and lift it to remove the lid plug for using the tamper or adding ingredients.
a. On/Off key: This key controls power to the machine. Push up to turn on the machine. Push down to turn off. b. High/Variable Switch: High: The High function can be used when a smart program is selected and when you are using Variable Speed Dial. Pushing the High/Variable Switch up to High position will cause the machine to blend at the highest speed available.
4 Preset Smart Programs’ Feature Program Speed SMOOTHIE Program controlled FROZEN DESSERT Program controlled ICE CRUSH Program controlled SOUP Program Preset Is Time Working Time Adjustable? 55seconds 50seconds No No Time Range Program controlled Program Auto start after 0 seconds 0 seconds Turn ice, frozen juices and fruit into icy, cold controlled 1 minute and 20 seconds No Program controlled 5 minutes No Program controlled controlled Used for Make silky smoothies, shakes a
WARNING Electrical Shock Hazard Use grounded outlet only. DO NOT use an adapter. DO NOT use an extension cord. DO NOT remove ground. Always unplug before cleaning or when not in use. Do not put the motor base in water or any other liquids or let any form of liquid enter the motor. Failure to follow instructions in manual can cause death or electrical shock. IMPORTANT: This unit contains electrical connections and moving parts that potentially present a risk to the user.
Tips: How to load your container according to your recipe? Ice & Frozen Ingredients Fruit & Veggies We suggest, liquids first, then dry goods, leafy greens, fruit & veggies and finally ice & frozen ingredients. Leafy Greens Dry Goods Liquids 4. With the motor off, set the container on the motor base by aligning it over the centering pad. The container can be installed in four different orientations. The handle can be aligned on either of the 4 sides of the motor base.
6. Check up the Variable Speed Dial. Make sure the High/Variable Switch is switched to Variable position and the marker on Variable Speed Dial is pointing to “0” before powering on. When the unit is connected to power and the container is correctly put onto the motor base, the unit will work at once under the set speed that the marker on Variable Speed Dial is pointing if the marker on Variable Speed Dial is not at “0”. 7. Plug the blender into a grounded, 2-prong outlet.
USING VARIABLE SPEED DIAL 1. Make sure the marker on Variable Speed dial is at “0” position. 2. Push the On/Off Switch up to On position, then slowly increase to the desired speed between 1 and 8 during the blending cycle. 3. During blending, you can push the High/Variable Switch up to High position for the highest speed of blending and turn it back to Variable position for using Variable Speed Dial again. 4.
* If ingredients are not blending properly, use a tamper to help push ingredients towards blades. If this does not work, press On/Off to Off position to power off. Remove the container from the blender base and use a rubber spatula to press the air bubble away from the blades. Add liquid if necessary. Replace the lid and lid plug. Replace container to the motor base and continue blending. 9. When blending is complete, turn off and unplug the appliance. Wait for the blades to completely stop spinning.
WARNING： IF THE TAMPER TOUCHES THE BLADES AT ANY ANGLE, DO NOT USE THE TAMPER WITH YOUR CONTAINER. 3. How to use the tamper? IMPORTANT! The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the blades when the lid is secured properly in the locked position. a. The container should not be more than two-thirds full when the tamper is used. b. If the food does not circulate, the blender may have trapped an air bubble.
the On/Off Switch up to On position. b. Slowly increase the variable speed to Variable 8. c. Run the machine for 30 to 60 seconds. For best results, using short “High” several times. d. Rotate the Variable Speed dial back to Variable 0 and turn off the machine. e. Rinse clean under running water and dry thoroughly. Hand Wash: (remove the container, lid, and lid plug) a. Wash the container, lid, and blades in warm soapy water. Rinse clean under running water and dry thoroughly.
TROUBLESHOOTING WARNING: To reduce the risk of shock and unintended operation, turn off power and unplug unit before troubleshoot-ing. Motor doesn’t start or blades doesn’t rotate 1.If the blender does not start, check to make sure you have plugged the unit in and that the On/Off switch is at On. 2.Make sure the container is securely placed on the motor base. 3.Check the fuse or circuit breaker. The blender has dual-protection circuits. a.For overheating. b.For overloads.
purchased through an authorized dealer. This warranty does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair by homgeek. homgeek shall not be liable for loss of use or any other incidental, consequential or indirect costs, expenses or damages. There are no express warranties except as listed under the terms of this Limited Warranty.
