Instructions / Assembly

Take the Allen Wrench, and turn the
bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolt.
Stand chair up on an even surface and
check that it is balanced. If there is a slight
wobble, apply downward pressure in the
corner where a leg is uneven. Keeping
pressure in that corner, tighten all bolts. If
balanced, apply downward pressure
evenly in the center and tighten all bolts.
Do not over-tighten beyond hole depth.
Helpful Tip:
-Instead of applying downward
pressure while reaching under
to tighten bolts, have someone
sit in the chair while you tighten
the bolts.
2
1
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
Attach Back Leg (C) to Chair Body (A) using Bolt (D), Flat Washer (E), Lock Washer
(F) by Allen Key (G) as below shown.
Attach Front Leg (B) to Chair Body (A), then rotate tightly.
B
A
C
E
D
F
G
Turn left or turn right to
adjust the leveler until
the chair is stabilized.
Leveler