Instructions / Assembly

ManualsBrandsHomeSullivan ManualsFurnitureBlack Metal Rustic Desk with Usb Charging Station

Table Of Contents

ASSEMBLY INSTRUCTION

E808-16 DESK WITH USB & WIRELESS CHARGER

B D

F H

1pc 1pc 2pcs

2pcs

Desk Top

Side Frame - Left

Side Frame - Right

1pc

Support Bar

8pcs 10pcs 8pcs

This page list all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

I K

J L

1pc

Bolt

M6x50mm

Bolt

M6x40mm

Bolt

M6x15mm

Rail

Bolt

M6x25mm

1pc 1pc 1pc

Hex Nut

Power Cord

Plug

1pc 1pc

Spanner

Allen Key

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTION E808-16 DESK WITH USB & WIRELESS CHARGER A Desk Top B Side Frame - Left C Side Frame - Right D Rail 1pc E Support Bar 1pc F Bolt M6x50mm 1pc G Bolt M6x40mm 2pcs H Bolt M6x15mm 2pcs I Bolt M6x25mm 8pcs J Hex Nut M6 10pcs K Power Cord 8pcs L Plug 1pc M Spanner 1pc N Allen Key M4 1pc 1pc 1pc 1pc This page list all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
1 Attach Side Frame - Left (B) & Side Frame - Right (C) to Rail (D), using Bolt (F) by Allen Key (N) as below shown. N F C B D D 2 First, attach Support Bar (E) to Side Frame - Left (B) & Side Frame - Right (C), using Bolt (H) by Allen Key (N) as below shown. Second, fix the center of Support Bar (E) with Bolt (I) & Hex Nut (J) by Allen Key and Spanner (M) in the same time as below shown.
PAGE 3
Attach pre-assembled Side Frame - Left (B) & Side Frame - Right (C) and Rail (D) to Desk Top (A), using Bolt (G) by Allen Key (N) as below shown. C N G B D D A 4 Insert one end of Power Cord (K) to the Left of Desk Top (A), and insert the other end of Power cord (K) to Plug (L), then connect the Plug (L) with electric outlet as below shown. A K L Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth.
PAGE 4
The USB output INSTRUCTIONS: 1. The three USB outputs cannot be used as a USB hub and do not transfer data; It's intended for charging only. 2. To charge your devise, plug the USB(not included with this product) to your devise and plug other end into available USB port. 3. Do not use a power adapter with a voltage over 5V, otherwise the equipment will be damaged and potentially dangerous. WIRELESS CHARGER INSTRUCTIONS: 1.