Instructions / Assembly

Table Of Contents

Wall

Cleaning & Care

Treat surface with care. Surface is resistant to scratches but is not scratch resistant.

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware

may loosen over time. Periodically check that all connections are tight.

*NOTE: WE RECOMMEND THAT YOU ATTACH THE PRODUCT TO YOUR

WALL AS A SAFETY PRECAUTION USING ANTI-TIPPING KIT (G) AS

BELOW INSTRUCTION.

Attach 2pcs mounting plate of Anti-Tipping Kit (G) to the holes on back of Top

Panel using Bolt (E) by Allen Key (F), making sure the Mounting Plate extend

DOWNWARD.

Drill 2 holes in your wall approximately 2” (Inches) BELOW the corresponding

positions of Mounting Plate and insert Wall Anchor as shown.

* NOTE: You may need to tap LIGHTLY with a rubber mallet.

Now connect the corresponding Mounting Plate with Connection Strap and

tighten as described before locking in place.

Wall