Instructions / Assembly

Table Of Contents

ASSEMBLY INSTRUCTION

E460-15 DESK

B D

1pc 1pc

Top Panel

1pc

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

Back Apron

1pc

23pcs

Allen Key

Left Side Frame Right Side Frame

Bolt

Ø1/4"x5/8"

Anti-Tipping Kit

2sets

PAGE 1
ASSEMBLY INSTRUCTION E460-15 DESK A Top Panel B Left Side Frame C Right Side Frame D Back Apron 1pc E Bolt Ø1/4"x5/8" 1pc F Allen Key M4 1pc G Anti-Tipping Kit 23pcs 1pc 1pc 2sets This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Attach Back Apron (D) to Left Side Frame (B) & Right Side Frame (C) using Bolt (E) by Allen Key (F) as below shown. F C E D E B 2 Attach Left Side Frame (B), Right Side Frame (C) and Back Apron (D) to Top Panel (A) using Bolt (E) by Allen Key (F) as below shown.
PAGE 3
*NOTE: WE RECOMMEND THAT YOU ATTACH THE PRODUCT TO YOUR WALL AS A SAFETY PRECAUTION USING ANTI-TIPPING KIT (G) AS BELOW INSTRUCTION. Attach 2pcs mounting plate of Anti-Tipping Kit (G) to the holes on back of Top Panel using Bolt (E) by Allen Key (F), making sure the Mounting Plate extend DOWNWARD. Drill 2 holes in your wall approximately 2” (Inches) BELOW the corresponding positions of Mounting Plate and insert Wall Anchor as shown. * NOTE: You may need to tap LIGHTLY with a rubber mallet.