Instructions / Assembly

7
First, connect 2pcs of Slat (J) together by 1pc of Middle Buckle (N). Next, lock the
assembled Slat (J) with Buckle (N) to Middle Rail (H). At last, insert two ends of Slat
(J) to Buckle (M) and then push Side Buckle (M) into Side Rail (I) as below shown.
Repeat the assemble steps to finish the rest slats assembling.
9
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
I
N
M
J
J
M
H
N
J