Instructions / Assembly

Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
1
Assemble Leg (B) into Chair Base (A) by using Bolt (C) with Allen Key (D).
A
B
B
C
D
2
Take the Allen Wrench, and turn the
bolts until the legs are secured. DO
NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolt.
Stand chair up on an even surface and check that it is
balanced. If there is a slight wobble, apply downward
pressure in the corner where a leg is uneven. Keeping
pressure in that corner, tighten all bolts. If balanced,
apply downward pressure evenly in the center and
tighten all bolts. Do not over-tighten beyond hole depth.
Helpful Tip:
Instead of applying downward
pressure while reaching under to
tighten bolts, have someone sit in
the chair while you tighten the
bolts.