ASSEMBLY INSTRUCTION CAT SLIPPER CHAIR B Chair Back B Chair Seat Front Leg (LSF) B Front Leg (RSF) 1pc 1pc 1pc [ Back Leg (LSF) l Back Leg (RSF) [& Allen Brit [ Allen Brit \ \ 1pc 1pc 1pc o Spring Washer Flat Washer Allen Key a1/4" 4mm @ Sp cs PCs 1pc Q @ This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Attach Chair Back (A) to the Chair Seat (B). E Tighten the Chair Seat (B) with Chair Back (A) using Allen Bolt (H), Spring Washer (1), Flat Washer (J) with Allen Key (K). Attach Front Leg (C & D) and Back Leg Chair Seat (B) using Allen Bolt (G), Spring Washer (1), Flat Washer (J) with Allen Key (K). Take the Allen Key, and turn the bolts until the legs are secured. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
B Stick the Black Non woven Fabric to the bottom of the Chair Seat (B). Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that comer, tighten all bolts. If balanced, apply downward pressure evenly in the center P and tighten all bolts. Do not over-tighten beyond hole depth. .
