ASSEMBLY INSTRUCTION 5438-15 (SPK) 1 DRAWER WRITING DESK Table Top Leg Cross Bar EX Trim 1pc pcs HA Brit Lock Washer Flat Washer Allen Wrench 14-20 x 2" 114° 114° 116° e pr 6 pcs 6 pcs 6 pcs 1pc This page lists all the contents included in the box. Please take the dime to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
BH Place the Table Top(A) upside down smooth carpet surface. Remove the Bolts, Lock Washers and Flat Washers with Allen Wrench(H). Ny H p Tighten the Leg(B) and Mounting Plate by Bolts(E), Lock Washers(F) and Flat Washers(G) with Allen Wrench(H).
i] Tighten the Table Top(A}, Cross Bar(C}, Trim(D} and Mounting Plate by using the removed Bolts, Lock Washers and Flat Washers which removed from STEP with Allen Wrench(H). Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
