ASSEMBLY INSTRUCTION 276BQ4 UPHOLSTERED STORAGE PLATFORM QUEEN BED Headboard Footboard Center Support Bar Rail Section - Front 1PC Rail Section - Rear 1PC Center Rail - Front / Rear 1PC Center Support Leg 2PCS Drawer Front Board 2PCS Drawer Side Board 2PCS Drawer Back Board 2PCS Drawer Bottom Frame 4PCS Drawer Bottom Board 8PCS Fabric Cover 4PCS Slat 4PCS Side Slat Connector 4PCS Center Slat Connector 1PC Drawer Board Connector 24PCS Wheel 24PCS Left Leg 12PCS Right Leg 8PCS Bracket 120*
Bolt 1/4"*17.5mm Bolt 1/4"*40mm Bolt 3/16"*19mm Bolt 3/16"*8mm 16PCS Bolt 1/4"*13mm 10PCS Bolt 1/4"*19mm 36PCS Bolt 1/4"*34mm 48PCS Nut 3/16"*6.5mm 8PCS Washer Ø16mm 4PCS Washer Ø19mm 16PCS L-Allen Key 4mm 8PCS Ratchet Tool 4mm 48PCS 4PCS 1PC 1PC These pages list all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
How to Use the Ratchet Tool (AJ) 1. Before assembling the furniture, please adjust the lock as needed. Lock on the right to loosen bolts! Lock on the left to tighten bolts! 2. Tighten or loosen bolts. Tighten bolts: Locate the turncap and rotate it clockwise to screw the bolt quickly until it cannot be rotated any more. Then start rotating the handle clockwise to finalize tightening the bolt. Turncap Handle Loosen bolts: Rotate the handle counterclockwise to loosen the bolt.
Attach the Bracket (U) to Center Support Bar (C), insert the Bolt (X), turn the Ratchet Tool (AJ) to tighten them. U C U AJ U C X Attach the Bracket (U) to the Rail Section - Front (D) and Rail Section Rear (E), insert the Bolt (Y), turn the Ratchet Tool (AJ) to tighten them. AJ E Y C U D E U D C D U E Attach the Left Leg (S) and Right Leg (T) to Headboard (A), insert the Bolt (W) and Washer (AH), turn the Ratchet Tool (AJ) to tighten them.
Cover the Fabric Cover (M) to the Headboard (A). Attach the Headboard (A), Footboard (B), and Legs (S) & (T) to the Rail Sections (D) & (E), insert the Bolt (Z), turn the Ratchet Tool (AJ) to tighten them. A E A Z D M S T A AJ E E D B Attach the Center Support Leg (G) to the Center Rail - Front / Rear (F), insert the Bolt (Y), turn the Ratchet Tool (AJ) to tighten them.
7 Insert the Side Slat Connector (O) to the Slat (N). Press the Side Slat Connector (O) to the holes of Rail Sections (D) & (E). Insert another side of Slat (N) to the Center Slat Connector (P), press the Center Slat Connector (P) to the holes of Center Rail - Front / Rear (F). O O N P N D N F N DO E N F FD 8 E P Attach the Wheel (R) to the Drawer Bottom Frame (K), insert the Bolt (AB), turn the Ratchet Tool (AJ) to tighten them.
10 Attach one Drawer Side Board (I) to the Drawer Bottom Frame (K), insert the Bolt (AA) and Washer (AG), turn the Ratchet Tool (AJ) to tighten them. I I K K AG AA 11 AJ Insert the Drawer Bottom Board (L) to the Drawer Side Board (I). I L I L 12 Insert another Drawer Side Board (I) to the Drawer Bottom Board (L) first, and attach the Drawer Side Board (I) to the Drawer Bottom Frame (K), then insert the Bolt (AA) and Washer (AG), turn the Ratchet Tool (AJ) to tighten them.
Attach the Drawer Back Board (J) to the Drawer Bottom Frame (K), insert the Bolt (AA) and Washer (AG), turn the Ratchet Tool (AJ) to tighten them. Attach the Drawer Board Connector (Q) to the assembled drawer, insert them into correct places. Q I J I J Q I Q J K 14 AA AG AJ Attach the Bracket (V) to the assembled drawer, insert the Bolt (AC), turn the Ratchet Tool (AJ) to tighten them.
Align drawers with the bed frame and push them into the bed. Lock drawers by slightly lifting drawers and inserting the Pins that the heads of Bolts (AD) into the Slots. Pin Slot 17 Slot Pin When pull out the drawers, lift the drawers first in order to make the Pins released from the Slots freely, then pull the drawers toward outside. DO NOT PULL OUT THE DRAWERS DIRECTLY. Pin Slot Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
