ASSEMBLY INSTRUCTION 271BQ METAL QUEEN BED Headboard Stretcher Headboard Footboard Front Side Rail 1PC Rear Side Rail 1PC Center Cross Bar 1PC Side Cross Bar 2PCS Center Rail 2PCS Center Support Leg 1PC Support Leg 2PCS Slat 2PCS Slat Connector 3PCS Left Leg 2PCS Right Leg 14PCS Bracket 65 x 25 x 2mm 28PCS Bolt 1/4" x 22mm 1PC Bolt 5/16" x 19mm 1PC Bolt 1/4" x 17.
Ratchet Tool 4mm Wrench 1/4" x 5/16" 1PC 1PC These pages list all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
How to Use the Ratchet Tool (U) 1. Before assembling the furniture, please adjust the lock as needed. Lock on the right to loosen bolts! Lock on the left to tighten bolts! 2. Tighten or loosen bolts. Tighten bolts: Locate the turncap and rotate it clockwise to screw the bolt quickly until it cannot be rotated any more. Then start rotating the handle clockwise to finalize tightening the bolt. Turncap Handle Loosen bolts: Rotate the handle counterclockwise to loosen the bolt.
Attach the Left Leg (M) and Right Leg (N) to Headboard (B), insert the Bolt (P), turn the Ratchet Tool (U) to tighten them. B M B U N M P Attach the Headboard Stretcher (A) to Left Leg (M) and Right Leg (N), insert the Bolt (P), turn the Ratchet Tool (U) to tighten them. M A P U N M A Attach the Rear Side Rail (E) to Front Side Rail (D), insert the Bolt (R), turn the Ratchet Tool (U) to tighten them.
Attach the Side Cross Bar (G) and Center Cross Bar (F) to Side Rails (D & E), insert the Bolt (P), turn the Ratchet Tool (U) to tighten them. P U P G U E E D F G D F D G E Attach the Center Support Leg (I) to Center Cross Bar (F), insert the Bolt (P), turn the Ratchet Tool (U) to tighten them. I P U F I F I Attach the Left Leg (M), Right Leg (N), and Footboard (C) to Side Rails (D & E), insert the Bolt (Q), turn the Ratchet Tool (U) to tighten them.
7 Attach the Center Rail (H) to Center Cross Bar (F) and Side Cross Bar (G), insert the Bolt (S) and Nut (T), turn the Ratchet Tool (U) and Wrench (V) to tighten them. U S G H T V H G H F H H F 8 Attach the Support Leg (J) to Center Rail (H), insert the Bolt (P), turn the Ratchet Tool (U) to tighten them. Attach the Center Support Leg (I) and Bracket (O) to Center Cross Bar (F), insert the Bolt (S) and Nut (T), turn the Ratchet Tool (U) and Wrench (V) to tighten them.