ASSEMBLY INSTRUCTION AVERY BLACK METAL FULL/ QUEEN PLATFORM BED LSF Headboard >B RSF Headboard =C LSF Footbridge Post RSF Footbridge Post 1PC 1PC 1PC 1PC 13 Headboard/ Rail Section(1) Rail Section(2) H Rail Support Leg Foot board PCS PCS PCS PCS 1 Front Support Bar Center Support Bar K Front Center Rail Rear Center Rail 1PC 1PC PCS 1PC M Center Support Leg N Slat le) Slat Connector P Finial PCS PCS PCS Q Bolt R Bolt L-Allen Key 4mm PCS PCS 1PC This page lists all the contents included in the box.
Align the LSF Headboard Post(A) and RSF Headboard Post(B) to the insert the Bolt(Q) to the holes, turn the L-Allen Key(T) to tighten them. Align the LSF Foot board Post(C) and RSF Foot board Post(D) to the insert the Bolt(Q) to the holes, turn the L-Allen Key(T) to tighten them. ~— ~~ Attach the Rail the Rail to the insert the Bolt(Q), turn the L-Allen Key(T) to tighten them. Attach the Rail Support Leg(H) to the rail, insert the Bolt(Q), turn the L-Allen Key(T) to tighten them.
Attach the Front Center Rail(K) and Rear Center Rail(L) to the Support insert Bolt(Q), turn the L-Allen Key(T) to tighten them. Attach the Center Support Leg(M) to the Center insert Bolt(Q), Bolt(R) and Nut(S), turn the L-Allen Key(T) and Wrench(U) to tighten them. ~— no Attach the Finial(P) to the post, then tighten it. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
