Installation Guide

ASSEMBLY INSTRUCTION

084-15 LIFT TOP DESK WITH 1 USB & WIRELESS CHARGER

Table Top

Left Frame Leg Stretcher

1pc 2pcs

Right Frame Leg

1pc

Bolt

M6x38mm

8pcs

Wood Dowel

M8x32mm

12pcs

Screw

M4x38mm

4pcs

A B C D

E F G H

Allen Key

1pc

This page lists all the contents included

in the box. Please take the time to

identify the hardware as well as the

individual components to this product.

As you unpack and prepare for

assembly, place the contents on a

carpeted or padded area to protect

them from damage.

PAGE 1
ASSEMBLY INSTRUCTION 084-15 LIFT TOP DESK WITH 1 USB & WIRELESS CHARGER A Table Top B Left Frame Leg 1pc E Bolt C Right Frame Leg 1pc F M6x38mm Wood Dowel M8x32mm 8pcs 12pcs D Stretcher 1pc G 2pcs Screw M4x38mm 4pcs H Allen Key M4 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
Put Wood Dowel (F) in Stretcher (D) and assemble it with Left Frame Leg (B) and Right Frame Leg (C). Use Screw (G) to assemble. B D F F G D C Put Wood Dowel (F) on Table Top (A) and assemble the Leg Frame on it. Then use Bolt (E) to assemble it. Use Allen Key (H) to tighten.
PAGE 3
Take out the Handle and assemble it outside. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.