Instructions / Assembly

STEP 3
Attach Support (E) to unit with Flat Washers (small), Spring Washers (small)
and Head Cap Bolts (small), tightening bolts only halfway.
Insert Axle (F) into unit.
Attach Wheels (G) to unit with Flat Washers, Spring Washers and Head Cap Bolts (short),
tightening bolts only halfway. (See Figure 2)
Tighten all Head Cap Bolts.
Cover center wheel holes with Caps.
Figure 2
Large Hex Wrench
Head Cap Bolt (short)
Spring Washer
Flat Washer
Assembly Instructions 4/5
G
G
F
E
Cap
Head Cap Bolt (short)
Spring Washer
Flat Washer
Head Cap Bolt (small)
Spring Washer (small)
Flat Washer (small)