Instructions / Assembly

Assembly Instructions 2/5
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Wrench and Hex Wrench as the bolts may need to be tightened up in the future.
STEP 1
Attach Arm (B) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Flat Washer
Spring Washer
Head Cap Bolt
B
A
Figure 1