Installation Guide

Anchor
1 pc.(+1 extra)
Bracket
1 pc.(+1 extra)
Plastic Belt
1 pc.(+1 extra)
Wall Screw
1 pcs. (+1 extra)
HARDWARE LIST
Attention !
For safety reasons, we recommended you strictly follow these
additional instructions to prevent the unit from tipping over.
Wall Bracket
Wall Screw
Plastic Belt
Assembly Instructions
Place the unit at desired
location in room.
Drill a ¼ hole in wall at the appropriate”
location.
Insert the Anchor into the wall hole and
attach the Bracket using the wall screw.
Use the Plastic Belt to secure the
hole at the back of unit to the Bracket on
the wall.
Put the tie end of the belt into the loop end
of the belt and pull until tight.
The hole at
the back of unit