Instructions / Assembly
Cover
Assembly Instructions 3/3
Figure 4
STEP 3
Turn table over to its’ upright position.
Cover umbrella hole with Cover.
Level table by adjusting the adjustable levelers on bottom of legs.
(See Figure 4)
STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into pre-drilled holes in Top (A),
then tighten. (See Figure 3)
Attach unit to Top (A) with
Flat Washers, Spring Washers
and Nuts, tightening nuts
only halfway.
Tighten all Nuts used
in Steps 1 and 2.
Cover all Nuts with Nut Caps.
A
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
Figure 3