Instructions / Assembly
Assembly Instructions 2/3
Flat Washer
Spring Washer
Nut
Nut Cap
STEP 1
Attach Legs (B) to Side Frames (C) and Side Frames (D) with Flat Washers, Spring Washers and
Nuts, tightening nuts only halfway. (See Figures 1 and 2)
Figure 1
Figure 2
B
C
C
B
D
B
B
D
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in the future.