Instructions / Assembly

Assembly Instructions 3/3

Figure 4

STEP 3

Turn table over to its’ upright position.

Level table by adjusting the adjustable levelers on bottom of legs.

(See Figure 4)

STEP 2

Attach Shelf (C) to unit with

Flat Washers, Spring Washers

and Nuts, tightening nuts

only halfway with Wrench.

(See Figure 3)

Tighten all Nuts used in Steps 1 and 2.

Cover all Nuts with Nut Caps.

Nut Cap

Nut

Spring Washer

Flat Washer

Figure 3

Spring Washer Flat Washer Bolt

Nut Cap Wrench Nut