Instructions / Assembly

Assembly Instructions 5/5
STEP 6
Turn unit from Step 2 to its’ upright position.
Slide Drawer (H) into position.
Note: To remove Drawer (H) in future, push plastic lever on left side up, push plastic
lever on right side down and pull open. (See Figures 2 and 3)
Place Metal Strips (I) into position.
Metal strips can be adjusted for letter or legal files.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 4)
Note: Unit must be level to work property.
H
Figure 4
Legal Size
Letter Size
I
Figure 2 Figure 3
Left Side
Right Side