Instructions / Assembly

Assembly Instructions 2/5
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Shelf (G) upside down on a soft cloth.
Attach Side Boxes (B) and (C) to Shelf (G) with Tapered Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Back Panel (D) to unit with Dowels and Flat Head Screws.
Tighten all bolts.
Figure 1
Flat Head Screw
Dowel
Tapered Bolt
B
C
D
G