Instructions / Assembly

Assembly Instructions 2/5
STEP 1
Attach Back Panels (F) to Side Panel (B)
with Head Cap Bolts (long). (See Figure 1)
Attach Base (H) to unit
with Head Cap Bolt (long).
Attach Side Panel (C) to unit
with Head Cad Bolt (long).
STEP 2
Attach Middle Panel (D) to
unit with Head Cap Bolts (short).
B
C
H
F
F
D
Head Cap Bolt (short)
Figure 1
Head Cap Bolt (long)
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.