Instructions / Assembly

Assembly Instructions 2/4
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Back Panel (F) and
Base (G) to Side Panel (B)
with Head Cap Bolts (long).
(See Figure 1)
Attach Side Panel (C) to unit
with Head Cap Bolts (long).
Attach Leg (H) to unit.
Figure 2
Figure 3
STEP 2
Turn unit to it’s upright position.
Attach Middle Panel (D) to unit.
Attach Magnets to Front Stretcher (E) with Wood Screws for Magnet.
(See Figure 2)
Attach Front Stretcher (E) to unit with
Head Cap Bolts (long) and Wood Screw (long). (See Figure 3)
Wood Screw (long)
D
Magnet
Wood Screw for Magnet
E
Head Cap Bolt (long)
Head Cap Bolt (long)
H
B
C
G
F
Figure 1