Installation Guide

Assembly Instructions 3/4
Figure 2
Figure 3
STEP 4
Turn unit to its’ upright position.
Insert Adjustable Pins into unit at desired level.
(See Figure 2)
Place Shelves (B) into position.
Level unit by adjusting the adjustable
levelers on the bottom on unit.
(See Figure 3)
Note: Unit must be level to work property.
Head Cap Bolt
Spring Washer
Flat Washer
STEP 3
Attach Top (A), Shelf (C) and Base (D) with
Flat Washers, Spring Washers and Head Cap Bolts,
tightening the bolts only half way.
Tighten all Head Cap Bolts used in all steps.
A
C
D
B
B
B
B
Adjustable Pin