Use and Care Manual

USE AND MAINTENANCE
Use on level surfaces only
Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly
or abrasive cleaners.
Astrid Futon Sofa Bed
PART LIST
1 - Futon Assembly x1
Assembly Instructions
1
2
A
Select and lay Futon
2
A
Assembly 1 and turn
over upside down.
Select 2 x2 and
insert leg post into
back hole in futon.
Turn clockwise
to hand tighten.
1
A
2 - Leg x2
HARDWARE
A - Bolt x4
C
2
A Select A Bolt x2, B Bolt x2,
Insert B Bolt into A into the
Leg with C Allen Wrench, then
through hole to part 1 Assembly.
2
A
Ensure the leg orients to point
outward for proper support.
Repeat the B into A into the Leg
for the other side.
B - Expansion Bolt x4
3
Turn Futon Assembly 1
over, you can sit there to
relax,push the backward
to lay flat,you can sleep.
C - Allen Wrench x1
Note:
To sleep - pull backrest
forward until it clicks to release
and then push backward to lay flat.
To Recline:
Lay flat to sleep, then pull up into
desired recline position.
Congratulations! Setup of your new
Futon is Complete!