Use and Care Manual

USE AND MAINTENANCE
Use on level surfaces only
Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are Still tight and working properly
Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
Tall & Large 4 Perch Cat Tower
PART LIST
1 - Cattery ×2
2 - Cattery ×2
3 -
Supporting Plate x1
4 - Cat Tree x1
5 - Front Supporter x1
6 - Rear Supporter x 4
7 - Second Rear Supporter x1
Assembly Instructions
1
2
3
Congratulations! Setup of your new
Tall & Large 4 Perch Cat Tower is Complete!
A
2
A - Screw x 2
B - Screw x 6
D - Screw x 3
F - Supporter x 2
C -
Hex Screwdriver x 1
HARDWARE
A
D
A
D
A
D
A
1
A
4
A
3
A
5
A
6
A
6
A
B
A
B
A
B
A
B
A
B
A
B
A
F
A
F
1.Select 1×1,3×1,4×1,5×1,6×2,B×5.Insert 4×1,5×1,and 6×2
into the 3 with B×4. Insert the 1 into the Top of the 5 with
the B ×1.
3.Insert the Fourth 6 into the Third 6 with the F and D.
Install the 1 into the top of the Fourth 6 with B.
2.Insert the 2 into the top of the 4 with A×1.Install the 6 into the
6 with one side of F×1 and D×1. Repeat for the 7 and the other 6.
Inseert the second F into the top of the 6 with D.Install the 2 into
the 7 with the D and A.
A
A
A
A
A
2
A
2
A
1
A
B
A
6
A
7
A
6
A
6
A
4
A
6
A
6