Use and Care Manual

USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly for safety.
- Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
Zero Gravity Chair
PART LIST
1
Instructions
2
3
1 - Chair
Unpack the chair
4
Place your hand on the chair
backrest by the pillow and your other
hand on the seat base near the
adjustment tightener
5
6
Gently pull the chair
backrest away from the
seat base to open the
chair
Lay the backrest all the way back Then begin to adjust the position
of the backrest upwards
Position backrest for sitting
7
8
Sit in the chair
When seated, recline to the desired position by
pushing backward on the handles. Locate the position
adjustment tighteners under the handles toward front.
9
10
Tighten the adjustment tighteners
to hold your position and enjoy.
Congratulations! Setup of your new
Naomi Home Zero Gravity Chair is
Complete!