Instructions / Assembly

2
Removing the existing fixture
3
Connecting the wires
□
Remove the existing fixture.
□ Connect the white supply wire to the white fixture
wire.
□ Connect the black supply wire to the black fixture
wire.
□ Connect the ground supply wire to the ground
fixture wire.
□
Use wire nuts to secure all connections.
4
Installing the ceiling fixture
□ Tuck the fixture wires into the ceiling box.
□ Slide up the canopy housing bracket with and secure
with canopy housing screws (C).
□ Check fixture cord set screw (J) and tighten if
necessary. Do not over tighten.
Installation
1
Adjusting the cord length
DANGER: Before installation, turn off the main power at the circuit breaker. WARNING: Installation must be performed by a qualified licensed electrician.
□ Remove the canopy housing screws (C) and
canopy housing (B).
□ Loosen the cord set screw (J). □ Pull the cord through canopy housing (B) to the
desired length.
□ Pull the cord through the cord lock (F).
CAUTION: To prevent electric shock, do not insert any objects through openings.
□ Cut excess cord.
B
J
F
BLACK Supply Wire
BLACK Fixture Wire
WHITE Fixture Wire
WHITE Supply Wire
GROUND Supply Wire
GROUND Fixture Wire
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
C
C
J
K
□ Insert light cord into globe and use the globe retainer (k)
and hand tighten. Do not over tighten.