Installation Guide

CAUTION:
1. Before starting installation of this xture or removal of a previous
xture, disconnect the power by turning o the circuit breaker or by removing the fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
FEATURES:
1. Easy to install. 2. Powder coated white pendant light xture with chrome wire guard. 3. For energy savings this xture has been engineered to safely use a
Self Ballasted Compact Fluorescent Lamp in place of an incandescent lamp
Thank you for purchasing this eLIGHT CFL Pendant Light Fixture. This product has been manufactured with the highest standards of safety and quality.
Page 2
2. Carefully, tuck all the wires and wire connect
tions into the Outlet Box. Sl ide the Fixture
Pan over the Outlet Box and then slide the decorative up the cord and tighten securely.
3. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch
on to activate the xture.
Page 3
INSTALLATION INSTRUCTIONS:
1. Pull the power supply wires out from the Ceiling Outlet Box. Attach the Black Supply Wire
to the Black Fixture Wire and the White Supply Wire to the White Fixture Wire. Using a small screwdriver, tighten the wires securely into quick connector box. Tape the Supply Ground.
Note: If you have electrical questions, consult your local
electrical code for approved grounding methods.
Twist to tighten
White wire (neutral)
Black wire
White wire (neutral)
Black wire
Power From Ceiling
Power To Light
Electrical Connections
Ceiling Electrical Box
Light Quick Connect Panel