Instructions / Assembly

INSTALLATION:
INSTALLATION INSTRUCTIONS:
Fixture Ground Wire
White Fixture Wire
Wire Nuts
White Supply Wire
Black Supply Wire
Supply Ground Wire
Fixture Mounting screws
Black Fixture Wire
Fixture Canopy
Outlet Box
Canopy mounting bracket
Page 4
INSTALLATION INSTRUCTIONS: (Continued)
Page 5
Outlet Box
Ceiling
Bottom View
Canopy mounting screws
Canopy Rods
Fixture Housing
Glass Globe
Decorative Mounting Ring
Decorative Nuts
1. Insert the metal canopy rods into the canopy and secure with nuts. 2. Insert the metal canopy rods into the xture housing and secure with nuts. 3. Thread the xture wires through one of the metal rods. 4. Install the canopy mounting bracket to the ceiling box with supplied screws. 5. Make the wiring connections using the supplied wire nuts from the light xture to the supply wires in the ceiling box. 6. Slide the canopy housing over the mounting bracket and secure with the canopy screws. 7. Install light bulbs (not included) 8. Install the glass globe using the decorative ring and decorative nuts. NOTE: If you have electrical questions, consult your local electrical code for approved grounding methods.
CAUTION:
DANGER: Before installation, turn off the main power at the circuit breaker.
Tuck wires into ceiling box.