www.HomeSelects.
WARNING: Installation must be performed by a qualified licensed electrician. DANGER: Before installation, turn off the main power at the circuit breaker. Safety Goggles Phillips Screwdriver Flathead Screwdriver Page 2 Electrical Tape Wire Cutters TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not included): CAUTION: To prevent electric shock, do not insert any objects through openings or attempt to open the adapter. CAUTION: Wire Strippers 3.
2. T est or replace switch. 3. Check wiring. 2. F aulty switch. 3. Faulty wire connection. Page 6 1. Check wire connections. Corrective Action 1. M ak e sure power supply is on. Possible Cause 1. P ower is of f . Light Bulbs Not Included Fuse blows or circuit breaker 1. Crossed wires or power wire is grounding out. trips when light is turned on. Light will not turn on.
DANGER: Before installation, turn off the main power at the circuit breaker. Page 4 Bottom View 1. Insert the metal canopy rods into the canopy and secure with nuts. 2. Insert the metal canopy rods into the fixture housing and secure with nuts. 3. Thread the fixture wires through one of the metal rods. 4. Install the canopy mounting bracket to the ceiling box with supplied screws. 5. Make the wiring connections using the supplied wire nuts from the light fixture to the supply wires in the ceiling box. 6.
