Getting Started Guide

Page 2
b) Click on the Network tab at the top and you will see a list under Web User Settings.
c) Enter a User Name and Password in to the respected fields and then choose the User Rights.
d) Click Add User once all fields have been completed. Click Delete to remove a User.
Updating Your HomeTroller S6 and Setting the Time Zone
Be sure to check for updates and install any that are available and set the time zone. To do this, follow these steps:
a) Upon HomeSeer booting it will check for updates.
b) You can either restart your HomeTroller or just restart HS3.
c) HomeSeer needs to be shut down once the update procedure begins.
a) Double click on the time in the bottom right of your screen in the system tray and then click Change Time Zone.
Restoring back to Factory Default
The HomeTroller S6 comes with a built in restore drive. This restore will set your system back to exactly how you
received it (factory default). Doing a system restore will reset your HomeTroller SEL back to factory default and wipe all
user data. WARNING: Make sure to make a backup of your HomeSeer HS3 folder (located C:\Program
Files(x86)\HomeSeerHS3) if you want to save anything from your previous HS3 install. All user data will be erased.
a) Attach a monitor and keyboard to your HT-S6.
b) Restart your HomeTroller.
c) Upon restart wait for the HomeSeer Start / Restore Menu to show.
d) Select the System Restore option.
e) Press Enter when it prompts to you select the restore option (ie S6_SYSTEMRESTORE_XXXXXX)
f) Your HomeTroller will restart once finished
STEP #2 – Local and Remote Access
Welcome to the new MyHomeSeer Remote. MyHS will allow you to access your HS3
system from anywhere without having to touch your router. There are requires for
MyHS to work. HS3 must be version 3.0.0.97 or later. HSTouch Android client requires
1.0.0.76 or later. Please make sure to update to
these versions. It is recommended that you
uninstall the application and then reinstall it from
the Play Store/iTunes Store. (This guide assumes
you have HSTouch Server already set up. If you
do not, please refer to the HS3 Quick Start Guide
on setting that up). Now, let’s get started!
To begin using MyHSRemote you will need to
register your HS3 software with the connected
service.
Registration
a) Once the HSTouch has finished installing, go ahead and open it up. You will be
prompted with a Log In to MyHS screen.
b) Click Register. Your default browser will come forward and load the registration
page.