Instructions / Assembly

Step 37: Make sure raf-

ters line up at peak with

rafters on gable end

walls and down tight

against top of sidewalls.

Step 38: Secure roof

panels with three 3"

deck screws through

each outside rafter

into gable rafters.

Step 32: Secure to

floor with 3" deck

screws at 18" and

36" from inside sid-

ing of right sidewall.

Step 33: Finish

securing walls with

3" deck screws at

bottom of rafters at

each corner.

Step 34: Secure

each corner where

walls meet with five

3" deck screws.

Step 36: Position roof panels by lifting over sidewalls keeping 1 x 3's towards

the peak. Roof panels are interchangeable and will fit on either side.

Step 39: Secure bot-

toms of each rafter

with a 3" deck screw

through 2 x 6 of side-

walls up into bottom of

rafters.

Step 35: Secure poly

strip at bottom of

door opening where

plywood meets poly

decking with two 1"

screws.