Instructions / Assembly

Step 29: Make sure

sidewall fits tight at back

corner, and secure bot-

tom 2 x 3 of sidewall to

floor with four 3" deck

screws through 2x3 into

2 x 6 joist.

Step 30: Position left sidewall

on left side of base making sure

it fits tight up against the back

wall and secure to loft with four

3" deck screws. The left side-

wall will also have a 3" x 5-1/2"

opening at the top back corner

for the swing arm.

Step 24: Position slide at front left opening of floor keep-

ing centered between posts and no deeper than 8" from

edge of poly decking. Secure with two 1" pan head

screws through the top of slide into poly decking.

Step 25: You are ready to

start assembling your play-

house. Grab back wall with

no window and gable top.

Position at back of floor with

siding overlapping

floor at bottom.

Step 26: Keep end wall

studs 2 1/2" from each

side of the floor.

Step 27: Secure back wall

to floor with four 3" deck

screws through 2 x 3 bot-

tom plate into 2 x 6 floor

joist.

Step 28: Position right

side sidewall with the 3" x

5-1/2" opening (see step

#52) at the top back cor-

ner for the swing arm.

Step 31: Install the

front wall by lifting up

on to loft and position

be-tween sidewalls;

make sure corners fit

tightly.