Instructions / Assembly

Step 12: When you have installed four 1/2" x 4-3/4" carriage bolts in each post ( twenty

total), secure bolts with 1/2" washer, lock washer, and nut on the threads of the carriage

bolts inside the recessed holes of the posts.

Step 13: Tighten 1/2" nuts with 3/4" socket wrench mak-

ing sure that base and floor are square to posts. Be

careful not to over tighten, stop tightening when head of

carriage bolts start to sink into 2 x 6's.

Step 14: When all twenty

bolts are tightened the play

set is ready to stand up.

With a person on each side

stand structure upright on

base.

Step 15: Check to make sure structure is square and

level. It may be necessary to add some blocks or fill

under posts to make level. Confirm that the unit is rotat-

ed exactly as you want it to be positioned in your yard.

Step 16: Install 5'x6' floor

to playhouse, the 2x3

joists on the floor drop

down beside 2x6 joists

of the loft floor. Keep the

2x3s that are cut short

towards the back.