Instructions / Assembly

Dear Customer,
This manual is designed to clearly explain the assembly process, however for best results we strongly
recommend having a carpenter involved in the project. Please read through the entire manual before
starting!!
For 2 men, it took 4 hours, using the tools listed below, to assemble this unit. However, it will prob-
ably take you a little longer since it will be a new project for you.
Take a deep breath and get at it, the satisfaction and enjoyment of playing in this unit is only a few
hours away. Have Fun!!!!!
Remember, it is very important that you have a level site for your Treehouse Lodge, and that the floor
is level prior to setting the walls.
TOOLS NEEDED:
-7/16”,1/2”,9/16”, and 3/4” deep sockets with 1/2”
drive
-3/4” wrench
-Hammer
-Medium vise grip pliers
-#2 phillips and square drive screwdrivers or bits
-Screw gun
-Paint brushes (for touch-up)
-Utility knife
-8’ step ladder
-Level
-Square
HELPFUL TOOLS:
-Impact wrench with 1/2” drive
-Finish nail gun
-Roof nailer
-Air compressor
Treehouse Lodge
Assembly Manual
revised 3/27/05