Instructions / Assembly

Door Installation

page 35

Step 108: Layout doors putting

door with latch hole cutout on the

right.

Step 109: Install left door using 2” black hinge screws. Keep door

tight against door frame with a 1/4” reveal at top.

Step 110: Install opposite door repeating previous steps as shown.

Note: It is important to keep the reveal consistent the whole

way across top of doors.

Step 111: Mark location of interior

door latch by tapping latch into

top and bottom header as shown.

Step 112: Drill out 5/16” hole for top and bottom latch as shown.

Step 113: Install door latch follow-

ing directions included with latch.