Instructions / Assembly

Fascia Installation

Step 80: Install back gable fascia as shown. Repeat steps on oppo-

site gable wall.

See step 81 below

page 30

Step 78: Remove gable fascia

pieces from package.

Step 79: Install gable fascia using 2” trim nails. Make sure fascia is

aligned properly at end of rafter and top of OSB roof sheeting.

Step 81: Install 8’ fascia section

by centering it on two rafters as

shown. Push top of fascia piece

up against bottom of OSB sheet-

ing.

Step 82: Trace fascia end pieces and cut to fit as shown. Repeat

steps on back wall.