Instructions / Assembly

OSB Roof Sheeting Installation
page 27
© Suncast Corporation
Step 65: Remove one 4’x8’,
one 4’x4’, one 15-7/8”x8’, and
15-7/8”x4’ OSB roof sheet from
package.
Step 66: Install first full sheet of OSB keeping sheet centered on
middle of rafter and flush with bottom of rafter.
Step 67: Fasten roof sheet to rafter using 2-1/4” nails spaced 8”
apart as shown.
Step 68: Before fastening top of
OSB sheeting mark off every 2’.
Fasten OSB to rafters making
sure rafters are spaced evenly at
2 ft. on center.
Step 69: Install remaining OSB pieces and repeat on back side.
Note: Make sure to stagger OSB splices.
Step 70: Paint building desired
color (paint purchased elseware).
Note: Trim pieces included are
primed white; paint the trim the
color that you prefer (easier if
done before installation.)