Instructions / Assembly

Optional Floor Assembly

Step 1: Cut open floor kit, cut metal bands, and remove top plywood sheet as shown.

Your floor kit should include all of the following parts:

Page 6

See drawings on previous page for measurements.

If you did not purchase the optional floor, please proceed to page 8.

Pressure Treated 2”x4”:

17 - 8'

13 - 17”

OSB pieces:

24 - 3-1/2" x 23-1/2"

5/8” Plywood Flooring

3 - 4’x8’ sheets, 2 - 4'x4' sheets

2 - 20"x8'

Note: The unit assembled for this manual was 10’x16’. This manual

is designed to help assemble a 10’x16’ or 10’x20’ Studio. If you have

purchased a 10’x20’ unit, please not that the pictures for some steps

will appear different from. Please refer to the included drawings for your

specific unit.