Instructions / Assembly

page 29

Step 62: Layout rafters and align as shown.

Step 63: First assemble two end rafters by fastening one rafter gusset to rafters using (12) 6p nails as

shown. Assemble remaining 7 rafters by fastening a rafter gusset to each side of rafter.

Step 64: Mark off wall every 2 ft.

on center.

Rafter Assembly & Installation

Incorrect, birdsmouth should be

at bottom end of rafter.

Step 65: Install first end rafter

making sure gusset is facing

inside. Keep rafter flush with

edge of gable wall.

See step 67 before continuing.

Step 66: Install remaining rafters

by aligning center of rafter with 2

ft. marks. Toenail rafters into top

wall plate to secure into wall.