Instructions / Assembly

Step 91: Install painted trim piece on top of strip keeping all edges
flush as shown.
Step 93: Attach painted 1x4 to
5/8” plywood piece using 2” trim
nails as shown (keep all edges
flush).
Step 88: Layout door trim pieces
as shown.
Door Trim Material List:
2 - 3-1/2”x73-1/2” 5/8 plywood
1 - 3-1/2”x78-3/4” 5/8 plywood
2 - 1”x4”x73-1/2” painted trim
1 - 1”x4”x78-3/4” painted trim
1 - 1”x3”x81” painted trim
Door Trim Installation
Step 89: Make a mark 3/4”
above door header at both ends
of door opening.
Step 90: Fasten unpainted door
trim strip aligning with edge of
siding and with mark.
Step 92: Repeat previous steps
making sure door trim is spaced
71-3/4” apart.
Step 94: Attach 1x3x81” flat on
top of 1x4 trim piece as shown.
Step 95: Install top door trim and
properly align as shown.
page 35
© Suncast Corporation