Instructions / Assembly

Step 44: Install remaining door
header stud to center on siding
piece splice.
Step 46: Cut siding piece to fit using mark and install as shown.
Step 48: Lift and set wall
repeating steps from back wall.
Step 51: Use nails to snap 4
lines to mark window outline.
Step 45: Take remaining 11-3/4”x4’ door header siding and mark
piece as shown.
Step 49: Fasten wall bottom
plate to floor and siding to floor
repeating previous steps.
Step 50: Put a nail in each
corner of window (4 total) and
out through siding.
Step 52: Use a skill saw to cut
out window opening.
Front wall is complete.
Note: Remove nails prior to
cutting
Step 47: Install remaining sid-
ing pieces.
page 18