Instructions / Assembly

Fascia Trim Installation

Step 87: Overhang first fascia

trim piece approximately 8”,

align with OSB sheeting using

a square, and fasten into 2”x4”

using galvanized trim nails.

Step 85: Cut 2”x4” fascia flush at edge.

Step 86: Layout 8’ primed fascia

trim pieces.

Step 88: Align remaining fascia trim boards with previously installed

boards and with OSB sheeting piece and fasten to 2”x4” as shown.

page 32

Step 84: Repeat previous steps on back gable overhang and on opposite gable wall.

Toenail front and back together.