Instructions / Assembly

Step 80: Layout gable overhang

pieces as shown.

White plywood goes on bottom,

OSB goes on top.

Gable Overhang Assembly & Installation

Step 77: Fasten OSB to

rafters making sure raf-

ters are spaced evenly

at 16” on center.

Step 78: Install remaining OSB pieces and repeat

on back side.

Note: Make sure to stagger OSB joints to maxi-

mize roof strength.

Step 79: Paint building

desired color (paint pur-

chased separately).

Note: Trim pieces

included are primed

white, you can paint

the trim a different

color to suit your

taste. It is easiest to

paint trim prior to

installing.

Step 81: Assemble gable overhang keeping OSB flush at bottom and edges. Fasten OSB to rafters

using 7d 2-1/4” nails every 8”.

page 30