Instructions / Assembly

page 28

Step 69: Mark off fascia board

every 16” from edge of end rafter

as shown.

Step 71: Pull rafter tight against fascia board and fasten as shown. Toenail rafter into top of wall.

Rafter Installation

Step 68: Sight and straighten front and back walls using the wall brace as shown. Fasten brace to floor

to keep wall straight. Note: Braces can be removed after roof sheeting has been installed.

Front & Back Wall Alignment

Step 70: Insert rafter behind fascia board and rest rafter on wall at

birds mouth cutout as shown.