Instructions / Assembly

page 26

Step 66: Overhang 8’ 2”x4” approximately 18” beyond edge of building, align board with front edge of

soffit and fasten every 8” as shown.

Step 67: Install remaining 2”x4” fascia boards as shown.

2”x4” Fascia Installation

Step 63: Put a nail in

each corner of window

(4 total) and out through

siding.

Window Opening Cutout

Step 64: Use nails to

snap 4 lines to mark

window outline.

Step 65: Use a skill saw to cut out window open-

ing.

Note: Remove nails before cutting out opening.