Instructions / Assembly

page 25

Step 58: Mark siding 8” from top of wall on both ends of gable wall

and snap a line as shown.

Step 60: Install first gable siding piece, keeping piece aligned at ends and with chalk lines as shown.

Note: Siding grooves should also align with grooves on lower wall.

Step 61: Install pre-cut gable

siding brace at siding splice as

shown.

Gable Siding Installation

Step 59: Starting with overlap at

front, layout gable siding pieces

as shown.

Note: There is a left and right

for end gable siding pieces.

Front piece for left gable wall

is 15” wide.

Step 62: Install remaining gable siding pieces repeating previous

steps. Repeat on opposite gable wall.

Note: If one gable wall has overhead door opening, see

instructions on pages 45-47.