Instructions / Assembly

page 24

Step 55: Mark last soffit piece and cut so soffit piece is flush with

edge of gable wall siding as shown.

Step 57: Align end rafters with side edge of soffit, and in 1-1/2” in from front of soffit and fasten as

shown.

Note: It is very important for rafter gusset to be facing towards interior of building.

Step 53: First soffit piece should pass end of wall stud 1/2” as

shown (to ensure soffit piece is flush with edge of siding after gable

siding is installed).

Step 54: Install remaining soffit

pieces until reaching last piece.

Step 56: Front soffit is complete,

repeat previous steps on back

wall.

1-1/2” from

edge of soffit

rafter gusset facing

interior of building