Instructions / Assembly

Step 35: Nail wall together using 12d 3” nails as shown.
Step 36: Begin with 4’x90” sid-
ing pieces on either side of door,
keeping 1/2” away from edge
of 2x4. Nail 4’x90” across top
only and only one nail at bot-
tom doorway corner of siding
piece.
Note: Left side of door should
have siding underlap.
Note: Right side of door
should have siding overlap.
Step 38: Before nailing rest of
siding, make sure that door
opening is square. Door is
square when corner to corner
diagonal measurements are
equal (approximately 99”).
Step 37: Install 16-3/4”x4’ siding
piece at top of door way - nail
across top only.
page 15
© Suncast Corporation
Siding Measurements:
2 - 1’x90”, 4 - 4’x90”
2 - 16-3/4”x4’ (for top of door)
1/2”
Reveal
3/4”
Reveal
One Nail
Here
4’x90”
1’x90”
16-3/4”x4’